What support is needed for growing a climbing rose

Climbing roses are often used in garden decoration. These are unusual plants that can be planted both on a flower bed and used for a hedge, decorate a gazebo with them, or let them curl around a fence. But so that the flower does not spoil the appearance of the garden, it looks neat and well-groomed, you need to make a support for it.

The role of the support

A support for a climbing rose is a necessary structure, without which the flower will not weave. Depending on the type of rack, you can independently build a decorative composition, set the direction of growth, and shape.

Climbing roses are a good option for creating flower beds and hedges in the country

Any structures can be used as a support for the plant, the main thing is that they meet all the necessary requirements. A support for a climbing rose must meet the following characteristics:

• Reliability. This is the main function of the stand. She must be strong. Often, gardeners make the mistake of thinking that the rose is a light plant. This is not true. Blooming flowers and developing shoots are heavy. Therefore, the rack must be able to withstand heavy loads. To achieve this, only high quality materials must be used in the manufacture. To ensure stability, it is recommended to bury part of the support in the ground.
• Compliance with environmental standards. Any support for the plant must be safe for the environment. Therefore, you need to give preference to environmentally friendly materials.
• Easy to use. It is not recommended to make the supports multifunctional. Complex structures will spoil the appearance, take up a lot of space on the site.
• Aesthetics. Although the main role of the support is to provide support to the plant, the structure must be attractive in appearance. It is advisable to choose a stand that fits beautifully into the overall style and landscape of the site.

The support for the plants must be strong

Varieties of supports for climbing roses

There are several types of climbing plant holders.

Trellis

The simplest design option for maintaining curly flowers is considered to be a trellis. You can easily do it yourself. The structure is a lattice made of thin wooden planks. This support meets all the necessary requirements.

Pergola

To form the composition of a climbing rose, a structure called a pergola can be used. It is a lattice roof that is installed on supports. The pergola performs an additional function - zoning the site.

Arch

One of the most popular designs for a plant is an arch. It is a support that combines not only functionality, but also reliability. The main advantage of arches is that they can hold a large number of flowers.

Arches are considered original supports for climbing roses.

Pillars

A simple rose stand can be made using simple pillars or pipes. They must be made of durable materials, be sure to be fixed in the ground. If the territory of the garden allows, you can install a composition of several supports, which are placed in a row.

Pyramid (cone)

If you connect several pillars to each other, you can make a support in the form of a cone. You will get a voluminous stand in which roses will intertwine not only outside, but also inside.

Suitable materials

When choosing supports for roses, you must first of all pay attention to the material from which they are made. It is also necessary to take into account the appearance of the structure, it must correspond to the general style of the garden.

Climbing plant stands can be made from:

• metal;
• stone;
• plastic;
• wood.

Materials can be combined with each other or used separately. For example, metal goes well with wood. A mesh with a fine mesh is not suitable as a support. The flower itself will not be able to curl, and it is difficult for gardeners to fix the shoots in small cells. If you want to use a mesh in landscape design, it is best to choose one with large holes.

Making a support at home

Making a support for a climbing rose with your own hands is much more profitable than buying a ready-made one in a store. Most often, at home, devices are made in the form of arches, pyramids and trellises. For manufacturing, you can use any available material that is on the site and is suitable for the requirements for structures.

Step-by-step instruction

The simplest and most affordable support to manufacture is a pyramidal structure. For its manufacture, two wooden boards up to 2.5 cm thick and up to 6 m long are suitable. Additionally, you need to prepare self-tapping screws and a hacksaw.

A DIY pyramid making workshop contains the following steps:

1. You need to cut one meter from each board. Divide the resulting segments in half and set them aside.
2. Cut the remaining five-meter boards in half. Then divide the blanks again to get 4 cm wide slats.
3. At the bottom of the structure, you need to make inserts from boards of 0.5 m.
4. At the top of the boards they are connected, on the side they are fixed with slats.
5. At the end of the work, horizontal steps are made between the posts from thin slats.

Supports for bush plants can be made from scrap materials

DIY arch

For the manufacture of a support in the form of an arch, it is recommended to prepare a drawing in advance. The structure can be made of wood, but it is better to make it from metal, and the top - wood, if necessary, so that it is large.

You need to start work by installing the main pillars. They are designed to ensure the stability of the structure, therefore it is recommended to dig them into the ground. At the bottom, the pillars can be reinforced with concrete.

After installing the pillars, you can start making the frame of the structure. At this stage, it is important to correctly calculate the dimensions. The distance of the posts from each other is preliminary estimated. As soon as the vault is installed on them, it is necessary to fix the bars intended for fastening plants over the entire area of ​​the arch. They can be either wooden or plastic.

To make an arch or trellis for roses look harmonious on the site, it is recommended to follow the recommendations of landscape designers:

• It is necessary to install the structure for the support before the bush is planted. If you do this afterwards, you can damage the roots of the plant.
• If roses are planted along the fence, you need to cover the support surface with varnish or paint.This will help prevent shoot infections.
• Crossbeams on the support should be done only if the plant twists and branches strongly.

Arches for climbing roses can be painted in different colors in accordance with the overall design of the site

Rules for tying flowers to supports

It is important not only to make a reliable structure, but also to know how to fix a climbing rose, tie it on it. After installing the support, you need to carefully distribute the shoots over it. All actions must be careful not to break off the stems. Regularly, you need to check that new young shoots are correctly intertwined, at the same time it is necessary to form a composition, since the branches grow on their own chaotically.

There are no antennae on the shoots of roses, with which you can fix the plant with a support. Therefore, gardeners need to use wire or hooks to secure them.

To form a beautiful and neat shape, you need to regularly cut the plant, apply fertilizers to the soil. Thanks to this, the rose will actively bloom.

There are many ideas for making a climbing plant support. Their use will allow you to form the correct shape of the bush, which will become a real decoration of the garden.