How to propagate a Money Tree at home

Content:

Propagation by cuttings
- Rooting in water
- Rooting shoots in the ground
Propagation by leaves
Seed propagation
Video

How to propagate a money tree in the right way at home - cut a plant, root shoots or leaves, propagate by sowing seeds. The most difficult and time-consuming of all methods will be the process with seeds, which requires certain conditions for its implementation and enhanced care for the sprouts later. Yes, and it is almost impossible to wait for the bloom of the bastard at home, and future seedlings may be completely different from the mother tree.

An excellent crop, succulent, which even at home can grow up to 50 cm in height, requiring transplantation into an extensive pot, is a money tree.

Process and result

Important! The plant grows well in the open field, reaching unprecedented sizes, rising up to 5 m. It got its name due to the shape of the leaf, which is very similar to a coin. It blooms in the wild richly, indoors - rarely or does not bloom at all due to lack of lighting.

Growing and reproducing a money tree is a fun process and will not cause much trouble, unless, of course, you choose the method of growing by seeds.

Propagation by cuttings

Crassula reproduction by cuttings is one of the easiest quick ways. Apical processes or stem cuttings are best suited for this purpose. As a result, in a short time it will be possible to recreate a developed plant, like two drops of water similar to the mother plant.

The moment of grafting

Note! Planting material should be rooted at the onset of active vegetation - in the spring. If you engage in this process in winter or autumn, then you should know that the roots appear at this time slowly, within 3-6 weeks.

Rooting is done:

In water,
In prepared soil.

Step-by-step process of preparing the cutting before the procedure:

The shoots should be 10-15 cm long with three pairs of leaves and three nodes.
The choice of shoots from which the cutting is cut with a sharp knife must also be careful. The shoot is chosen strong, strong and well developed.
The cut in the lower part should be made as close to the node as possible - roots will soon appear in this place.
After the cutting is cut, it should be dried for 1-2 days in the open air.

Important! No rhizome formation stimulants should be used. If you do everything correctly, then the roots appear in 100% of cases. There are a large number of cases in history when the stalk lay for weeks in the open air, and then gave roots.

Rooting in water

Reproduction and rooting of a fatty woman by cuttings in water is as follows:

Take a well-cleaned glass or vessel.
Pour in previously boiled and cooled to room temperature water, add 2 tablets of activated carbon there.
In the area of the cutting, which is immersed in liquid, remove all leaves, as they can cause decay processes.
The jar must be placed in a warm place where there will be no direct sunlight.
At the moment when the roots become at least 2 cm, you can plant the sprout in a separate pot with pre-prepared soil or purchased soil for succulent crops.

Rooting in water

Note! This method allows the roots to appear more alive than in other types of propagation. However, at the same time, there is a high risk of rotting of the cutting, especially if the air temperature in the room is cool.

Rooting shoots in the ground

Before planting the prepared shoot in the ground, it is worth preparing it.

Rooting the appendix

For these purposes, different types of land are taken in equal proportions:

Sheet,
Sod,
River sand,
Or you can take perlite or clean coarse sand,
Store soil for cacti and succulent plants is also good.

The scheme is as follows:

Take a small pot (up to 8 cm in diameter), place a drainage layer on the bottom of the container.
Lay the soil mixture on top, it is not worth tamping much. Saturate with moisture.
Place the stalk in the center of the pot, so that the end located at the bottom fits into the depth of the soil by 3-4 cm. The foliage is removed from the lower parts of the appendix.
Place the container in a warm point (optimally 18-22 degrees), illuminated, but without the presence of direct sunlight.

Additional Information. Cuttings do not need a certain humid microclimate, which means that mini-greenhouses do not have to be tinkered either. The most important thing is to moisten the soil as it dries. After the shoots take root, the plant begins its active development, then it is permissible to transfer the pot and pay equal attention to it, as for adult flowers.

Propagation by leaves

How easy it is to propagate a fat woman - with the help of leaves. True, this method will take a more extensive time. The rooting of the leaf itself occurs quickly, but the children do not appear so soon.

How to water a money tree at home

What needs to be done in the preparation process:

Choose healthy leaves without rot and symptoms of diseases, lesions.
It is better to separate those specimens that are in the middle areas of the shoots of the mother tree.
Bulky, dense, well-toned leaves are the best option. If it is possible to separate those on which there are aerial roots at the moment, this is a 100% guarantee of successful rooting.

Additional Information. Withered, withered leaves will dry out even before the moment when the roots are put in, and the young ones will take root for a long period, since they themselves are completely weak and not strong.

Rooting in soil

According to flower growers, this method is better, more convenient and more effective than placing the leaf in water.

How to root the leaves of the bastard in the ground:

Take a small bowl or container.
Pour in soil mixture and slightly moisten.
Leaves must be pre-dried (within 1-2 days). Place them at ground level in such a way that the lower part has contact with the soil.

How can the leaves be laid out:

Along the entire border of the pot, deepening a few millimeters and resting on the border or edge.
Deepen the sheet by one third of its size, then fix it with wooden fixtures or sticks.

Sheet in the ground

Important! In this case, it is better to install the container in a mini-greenhouse. It is easy to do it yourself: the bowl is placed in an impenetrable plastic bag, then covered with a glass vessel, so that the sun's rays penetrate. At the same time, airing should be carried out daily to avoid leaf decay due to high humidity.

Children will form for a long time, so you should arm yourself with endurance. Once the sprouts have appeared, remove the glass jar. After another 2-3 weeks, the sprouts can be transplanted into the ground.

Rooting in water

How the jellyfish leaf multiplies and takes root in water:

The lower, well-developed leaf is carefully separated and left in the shade for a day.
A flat container, vial or container is prepared, the bottom end of the sheet is immersed in water by 0.5 cm. It is allowed to add Kornevin to the liquid.
Transfer the container to a warm place without direct sunlight.
After the roots appear, the leaf is transplanted into a small container so that the root system develops even more.

Rooting a leaf in water

A month later, it can be transplanted into a pot with a diameter of 5-7 cm.

What varieties can not be propagated by a leaf

Variegated variegated varieties require delicate care and a special breeding process. They reproduce only in a vegetative way; when germinating seeds, the species, as a rule, loses its decorative effect and variegation.

Fat Rubra

Fresh sprouts of these varieties can only be obtained with the help of stem cuttings. When the leaves are multiplied, the variegation of the foliage may disappear, so it is not always possible to get the desired plant.

The reproduction process takes place in this way:

In March or April, cuttings are cut from the tops of the pagons.
The cut should be immediately treated with activated carbon powder, both on the mother tree and on the shoot. Let the cuttings dry for 2-3 days.
The scion can be placed either in water or buried in a soil mixture of sod and leafy soil. Roots tend to appear quickly.
A stalk that has already taken root does not need to be covered with anything. But it is worth regularly and moderately moisturizing.

Additional Information. This species reproduces not only in the spring. If you cut the cuttings at another time of the year, then there will be no questions, like difficulties, with reproduction and rooting.

Variegated varieties are very colorful and unusual crops that attract with their extraordinary painted crown. Caring for them is significantly different than that of relatives with green branches. If you remember and take into account all the nuances of maintaining and caring for a plant, then at home it will not be difficult to grow an extraordinary handsome man.

Seed propagation

How a money tree blooms at home

This type of reproduction is mainly carried out by breeders. They can get hybrids and varieties that are not inferior to the mother tree. In an apartment, such an effect is unlikely to be achieved. This is a long process, caring for seedlings will require a lot of time and effort.

Important! If the culture has a spacious pot, it will never bloom. The fat woman needs more "cramped" living conditions. To wait for flowering, the plant must be at least five years old.

Rules for successful flowering:

In winter, the flower should be kept in a cool room (up to +15 degrees temperature), in the spring - exposed to the open air.
There should be no sudden temperature jumps.
September - the end of February is a dormant period. You do not need to introduce any additional fertilizing, only water it several times a month.
Starting in March, fertilizer is introduced at the time of watering. Take top dressing in specialized stores.
The plant is provided with good lighting, but the light must be diffused.
The leaves must be wiped off dust. To do this, dilute 1 tablet of succinic acid in 1 glass of liquid, use this solution.
During the flowering period, fertilizing with top dressing is mandatory.
When the buds began to wither and dry up, the seed was ripe. The inflorescences must be cut off and left to dry in an open container.
Sow the seed immediately after removing the seed.

Shoot, germination of seeds

Germination process:

Take a low, disinfected container with a drainage layer. A mixture of succulent substrate and sand (2: 1) is laid on it, and powder from ash is sprinkled on top.
Moisten the soil with a weak solution of potassium permanganate. It should be at room temperature.
Seeds are sown on the ground without deepening and sprinkling with earth.
Cover the container with a glass lid or glass, but leave a small gap.
Every day, observe what happens to the seeds: wipe the formed condensate, irrigate the ground with warm water.
After three weeks, the seeds will begin to germinate. The lid should be removed. When the seedlings grow, they should be dived into a separate flat container, the distance between the shoots is 1 cm. Care and soil should be the same.
When the sprouts have grown by 7-10 cm, they should be planted in a soil mixture of sod (1 part), leafy (2 parts) earth and sand (1 part). Care is the same as for cuttings.
Leaving - temperature 15-18 degrees, good lighting with diffused light.
Subsequently, care becomes the same as for an adult tree.

Important! You should not be zealous with watering when caring for cuttings, young shoots, or just emerging seedlings. The fat woman does not tolerate strong watering and instantly loses its decorative effect, the foliage begins to fade, fade and become covered with brown spots.

Planting a money tree is not so difficult, even a novice florist can handle it. To breed this crop by sowing seeds, you need to try. In addition, you should remember about quality care, otherwise the plant will be lopsided and inconvenient for the rest of the flowers. Regular lighting (at least 12 hours a day) and turning the pot with a jersey around its axis will allow the crown to form evenly.

Video

Money tree - home care and flowering